PoE-over-Coax - PoE Technologies USA Manufacturer of IP/PoE Transmission Products

Go to content

Main menu


Products > Coax Convertors


PoE-over-Coax, Highwire, Veracity, AXIS, NVT, eBridge1PCRT, Altronix,

The PoE-over-Coax Series helps reduce the cost of adding IP camera, by using existing coax cabling.

Using PoE-over-Coax series Ethernet and Power for an IP camera can be used for up to 2,000ft(650m)

The PoE-over-Coax Receiver unit is self-powered via PC-Coax transmitter eliminating the need for additional local power at IP camera side. A 60 watt PoE Injector is included.

Superior robust design with a IP67/Nema 4x rating,the PoE on Coax can be placed in the toughest environments.

Product Highlights:

  • Superior robust design with a IP67/NEMA 4x rating.

  • Waterproof Ethernet connectors.

  • Wall Mounting Kit

  • Transparent to Network

Outdoor rated PoE-over-Coax


IEEE 802.3 for 10Base-T Ethernet
IEEE 802.3µ for 100Base-TX Fast Ethernet
IEEE-802.3af for PoE
IEEE 802.3 Auto-Negotiation
Data Transfer Rate: 10/100/500Mbps
Connectors: Waterproof IP67 rated RJ-45
Topology:  Linear
Humidity: Operating: 10 % to 90 % RH
Size: : L 3inches W 4.25inches H 1.75inches
Power: IEEE 802.3af and IEEE 802.3at 57 vDC 60 watts
Temperature: Operating Temp: -40° ~ 140° F
Storage Temp:  -40° ~ 158° F  

10/100/600Mbps Auto-Negotiation/Auto-MDIX Fast Ethernet Port
Operates at Maximum Packet Filtering and Forwarding Rate
Zero Packet Loss Back-Pressure Flow Control for Half Duplex


  • IEEE-802.3af compliant

  • IP66/Nema4x Aluminum Enclosure

  • Draws Less than 1.5 watts of power

  • 1k Mac Address Table

  • 10/100 Mbs Bandwith

  • Networking Switch Technology

  • WaterProof RJ45 Connectors

  • Transparent to Network

 4 Port PoE Powered network switch via Uplink Port

Model Number

PoE-over-Coax, Highwire, NVT



Back to content | Back to main menu