PoE-H-HB-D7 - Copy - PoE Technologies USA Manufacturer of IP/PoE Transmission Products

Go to content

Main menu

PoE-H-HB-D7 - Copy

Support > EoL
 



PoE-H-HB-D7 Series


The PoE-H-HB-D7 series enclosure is designed for all major Fix and PTZ Dome IP cameras using Power-over-Ethernet (PoE). The PoE-H-HB-D7 can be connected to a standard network PoE cable.

Product Highlight:

Wall mount, Dual Bell Design, heater and fan, all.aluminum, no plastic parts, pre-terminated RJ45 connectors.
60 Watt PoE Injector for PTZ

 
 
7 Inch PoE Dome Camera Enclosure

Specs:

Mechanical
Exterior 18.0(L) x 5.75(H) x 9(W) (with shroud)
Interior 11(L )x 3.65
(H) x 4(W) (camera install size)
Protective Latching Eyehole
Front Lift Top with Compression Spring
Electrical/Network
48 vDC using Power-over-Ethernet
4 watts: Heater
1 watts: Blower
Heater On: 5c (41f) Off: 15c (59f)
Blower On: 40c(104f) Off: 25c(77f)
IP66 RJ45 Panel Connector
10/100 Mbs Ethernet
General
Industrial Aluminum Construction (2.54mm wall)
Grey Polyester Powder Coat
10mm Protective Gasket
4.2Lbs
Accessories (included)
Heat/Ice Shroud
Heater/Blower(Fan)
Wall Mount (10.75inches)
Rating
IP66/NEMA 4X
IEEE-802.3af

Features

Plug-n-Play Install
   IEEE-802.3af and IEEE2.3at Compliant
   Spring Hinged
   Locking Latch
   Cast and Extruded Aluminum Construction
   Ideal for Outdoor Applications
   Easy Access for Installation and Service
   IP67 Rated RJ45 Connector on Bottom of Enclosure
   Factorry Installed Heater/Fan
   Native PoE Connections Inside Enclosure
   Heat/Ice Shield



Model Number

PoE-H-HB-D7


Download

PoE-H-HB-D7


Back to content | Back to main menu