PoE Extender Multi Port Outdoor - PoE Technologies USA Manufacturer of IP/PoE Transmission Products

Go to content

Main menu

PoE Extender Multi Port Outdoor

Products > PoE/Ethernet Extender
 

Multi-Line Power-over-Ethernet Switch & Extender

The MLE-PoE series is a Harden Multi-Line Power-over-Ethernet Network Switch delivering  both data and power to Network PoE devices such as IP Cameras, IP Access Controls, or Wireless Access Points.

The MLE-PoE is self-powered via PoE Uplink port, eliminating the need for additional local power. A 60 watt PoE injector is included.

By placing the MLE-PoE at 328ft (100 meters) intervals utilizing network cable, data and power can be extended an additional 328ft. Amount of devices dependent on power usage/management.

Product Highlights:

  • Superior robust design with a IP67/Nema 4x rating,

  • MLE-PoE can be placed in the toughest environments.

  • Self Powered via PoE Uplink Port

  • 60 watt PoE Injector included (MLE-PoE)


PoE Technologies Mulitple Port PoE Extender, Powered via Uplink PoE Port

Specs:

Standards:
IEEE 802.3 for 10Base-T Ethernet
IEEE 802.3µ for 100Base-TX Fast Ethernet
IEEE-802.3af for PoE ANSI/
IEEE 802.3 Auto-Negotiation
Data Transfer Rate: 10/100/200Mbps
Connectors: Waterproof IP67 rated RJ-45  
Topology: Star
Humidity: Operating: 10 % to 90 % RH
Size: L 6inches W 4.25inches H 1.75inches
Power:  48 vDC 1.25A  60 watts (PoE Injector included)
Temperature: Operating Temp: -40° ~ 140° F
Storage Temp:  -40° ~ 158° F  

10/100Mbps Auto-Negotiation/Auto-MDIX Fast Ethernet Port
Half or Full Duplex Operation for Each Port
Operates at Maximum Packet Filtering and Forwarding Rate
Store and Forward Switching Method
64KB Buffer memory Address Table up to 1K MAC Address

PRODUCT CODE
MLE-PoE

Features:


  • 60 watts of Power Between 4 Ports

  • IP67/Nema4x rating Aluminum Enclosure

  • Draws Less than 1.5 watts of power

  • 1kMac Address Table

  • 10/100 Mbs Bandwith

  • Network Switch Technology

  • Waterproof RJ45 Connectors

  • PoE Driven 4 Port PoE Switch

MLE-PoE 4 Port PoE Powered via Uplink Port
 

Model Numbers:

MLE-PoE:  
   1 Port PoE In, 4 Port PoE Out
MLE-Do        1 Port PoE In, 4 Port Ethernet Out (IEEE-802.3af compliant)



Downloads:

MLE-PoE





Back to content | Back to main menu